|
extractseq |
Wiki
The master copies of EMBOSS documentation are available at http://emboss.open-bio.org/wiki/Appdocs on the EMBOSS Wiki.Please help by correcting and extending the Wiki pages.
Function
Extract regions from a sequenceDescription
extractseq reads a sequence and writes sub-sequences from it to file. The set of regions to extract is specified on the command-line or in a file as pairs of start and end positions. The regions are written in the order in which they are specified. Thus, if the sequence AAAGGGTTT has been input and the regions: 7-9, 3-4 have been specified, then the output sequence will be: TTTAG. Optionally, each region may be written out as a separate sequence.
Usage
Here is a sample session with extractseqExtract the region from position 10 to 20:
% extractseq tembl:x65923 result.seq -regions "10-20" Extract regions from a sequence |
Go to the input files for this example
Go to the output files for this example
Example 2
Extract the regions 10 to 20, 30 to 45, 533 to 537:
% extractseq tembl:x65921 result2.seq -regions "10-20 30-45 533-537" Extract regions from a sequence |
Go to the input files for this example
Go to the output files for this example
Example 3
Extract the regions 782-856, 951-1095, 1557-1612 and 1787-1912:
% extractseq tembl:x65921 -reg "782..856,951..1095,1557..1612,1787..1912" stdout Extract regions from a sequence >X65921 X65921.1 H.sapiens fau 1 gene atgcagctctttgtccgcgcccaggagctacacaccttcgaggtgaccggccaggaaacg gtcgcccagatcaaggctcatgtagcctcactggagggcattgccccggaagatcaagtc gtgctcctggcaggcgcgcccctggaggatgaggccactctgggccagtgcggggtggag gccctgactaccctggaagtagcaggccgcatgcttggaggtaaagtccatggttccctg gcccgtgctggaaaagtgagaggtcagactcctaaggtggccaaacaggagaagaagaag aagaagacaggtcgggctaagcggcggatgcagtacaaccggcgctttgtcaacgttgtg cccacctttggcaagaagaagggccccaatgccaactcttaa |
Example 4
Extract the regions 782-856, 951-1095, 1557-1612 and 1787-1912 all to separate output sequences:
% extractseq tembl:x65921 -reg "782..856,951..1095,1557..1612,1787..1912" stdout -separate Extract regions from a sequence >X65921_782_856 H.sapiens fau 1 gene atgcagctctttgtccgcgcccaggagctacacaccttcgaggtgaccggccaggaaacg gtcgcccagatcaag >X65921_951_1095 H.sapiens fau 1 gene gctcatgtagcctcactggagggcattgccccggaagatcaagtcgtgctcctggcaggc gcgcccctggaggatgaggccactctgggccagtgcggggtggaggccctgactaccctg gaagtagcaggccgcatgcttggag >X65921_1557_1612 H.sapiens fau 1 gene gtaaagtccatggttccctggcccgtgctggaaaagtgagaggtcagactcctaag >X65921_1787_1912 H.sapiens fau 1 gene gtggccaaacaggagaagaagaagaagaagacaggtcgggctaagcggcggatgcagtac aaccggcgctttgtcaacgttgtgcccacctttggcaagaagaagggccccaatgccaac tcttaa |
Command line arguments
Extract regions from a sequence
Version: EMBOSS:6.6.0.0
Standard (Mandatory) qualifiers:
[-sequence] sequence Sequence filename and optional format, or
reference (input USA)
-regions range [Whole sequence] Regions to extract.
A set of regions is specified by a set of
pairs of positions.
The positions are integers.
They are separated by any non-digit,
non-alpha character.
Examples of region specifications are:
24-45, 56-78
1:45, 67=99;765..888
1,5,8,10,23,45,57,99
[-outseq] seqoutall [
|
| Qualifier | Type | Description | Allowed values | Default |
|---|---|---|---|---|
| Standard (Mandatory) qualifiers | ||||
| [-sequence] (Parameter 1) |
sequence | Sequence filename and optional format, or reference (input USA) | Readable sequence | Required |
| -regions | range | Regions to extract. A set of regions is specified by a set of pairs of positions. The positions are integers. They are separated by any non-digit, non-alpha character. Examples of region specifications are: 24-45, 56-78 1:45, 67=99;765..888 1,5,8,10,23,45,57,99 | Sequence range | Whole sequence |
| [-outseq] (Parameter 2) |
seqoutall | Sequence set(s) filename and optional format (output USA) | Writeable sequence(s) | <*>.format |
| Additional (Optional) qualifiers | ||||
| -separate | boolean | If this is set true then each specified region is written out as a separate sequence. The name of the sequence is created from the name of the original sequence with the start and end positions of the range appended with underscore characters between them, eg: XYZ region 2 to 34 is written as: XYZ_2_34 | Boolean value Yes/No | No |
| Advanced (Unprompted) qualifiers | ||||
| (none) | ||||
| Associated qualifiers | ||||
| "-sequence" associated sequence qualifiers | ||||
| -sbegin1 -sbegin_sequence |
integer | Start of the sequence to be used | Any integer value | 0 |
| -send1 -send_sequence |
integer | End of the sequence to be used | Any integer value | 0 |
| -sreverse1 -sreverse_sequence |
boolean | Reverse (if DNA) | Boolean value Yes/No | N |
| -sask1 -sask_sequence |
boolean | Ask for begin/end/reverse | Boolean value Yes/No | N |
| -snucleotide1 -snucleotide_sequence |
boolean | Sequence is nucleotide | Boolean value Yes/No | N |
| -sprotein1 -sprotein_sequence |
boolean | Sequence is protein | Boolean value Yes/No | N |
| -slower1 -slower_sequence |
boolean | Make lower case | Boolean value Yes/No | N |
| -supper1 -supper_sequence |
boolean | Make upper case | Boolean value Yes/No | N |
| -scircular1 -scircular_sequence |
boolean | Sequence is circular | Boolean value Yes/No | N |
| -squick1 -squick_sequence |
boolean | Read id and sequence only | Boolean value Yes/No | N |
| -sformat1 -sformat_sequence |
string | Input sequence format | Any string | |
| -iquery1 -iquery_sequence |
string | Input query fields or ID list | Any string | |
| -ioffset1 -ioffset_sequence |
integer | Input start position offset | Any integer value | 0 |
| -sdbname1 -sdbname_sequence |
string | Database name | Any string | |
| -sid1 -sid_sequence |
string | Entryname | Any string | |
| -ufo1 -ufo_sequence |
string | UFO features | Any string | |
| -fformat1 -fformat_sequence |
string | Features format | Any string | |
| -fopenfile1 -fopenfile_sequence |
string | Features file name | Any string | |
| "-outseq" associated seqoutall qualifiers | ||||
| -osformat2 -osformat_outseq |
string | Output seq format | Any string | |
| -osextension2 -osextension_outseq |
string | File name extension | Any string | |
| -osname2 -osname_outseq |
string | Base file name | Any string | |
| -osdirectory2 -osdirectory_outseq |
string | Output directory | Any string | |
| -osdbname2 -osdbname_outseq |
string | Database name to add | Any string | |
| -ossingle2 -ossingle_outseq |
boolean | Separate file for each entry | Boolean value Yes/No | N |
| -oufo2 -oufo_outseq |
string | UFO features | Any string | |
| -offormat2 -offormat_outseq |
string | Features format | Any string | |
| -ofname2 -ofname_outseq |
string | Features file name | Any string | |
| -ofdirectory2 -ofdirectory_outseq |
string | Output directory | Any string | |
| General qualifiers | ||||
| -auto | boolean | Turn off prompts | Boolean value Yes/No | N |
| -stdout | boolean | Write first file to standard output | Boolean value Yes/No | N |
| -filter | boolean | Read first file from standard input, write first file to standard output | Boolean value Yes/No | N |
| -options | boolean | Prompt for standard and additional values | Boolean value Yes/No | N |
| -debug | boolean | Write debug output to program.dbg | Boolean value Yes/No | N |
| -verbose | boolean | Report some/full command line options | Boolean value Yes/No | Y |
| -help | boolean | Report command line options and exit. More information on associated and general qualifiers can be found with -help -verbose | Boolean value Yes/No | N |
| -warning | boolean | Report warnings | Boolean value Yes/No | Y |
| -error | boolean | Report errors | Boolean value Yes/No | Y |
| -fatal | boolean | Report fatal errors | Boolean value Yes/No | Y |
| -die | boolean | Report dying program messages | Boolean value Yes/No | Y |
| -version | boolean | Report version number and exit | Boolean value Yes/No | N |
Input file format
extractseq reads a single nucleotide or protein sequence.
The input is a standard EMBOSS sequence query (also known as a 'USA').
Major sequence database sources defined as standard in EMBOSS installations include srs:embl, srs:uniprot and ensembl
Data can also be read from sequence output in any supported format written by an EMBOSS or third-party application.
The input format can be specified by using the command-line qualifier -sformat xxx, where 'xxx' is replaced by the name of the required format. The available format names are: gff (gff3), gff2, embl (em), genbank (gb, refseq), ddbj, refseqp, pir (nbrf), swissprot (swiss, sw), dasgff and debug.
See: http://emboss.sf.net/docs/themes/SequenceFormats.html for further information on sequence formats.
Input files for usage example
'tembl:x65923' is a sequence entry in the example nucleic acid database 'tembl'
Database entry: tembl:x65923
ID X65923; SV 1; linear; mRNA; STD; HUM; 518 BP.
XX
AC X65923;
XX
DT 13-MAY-1992 (Rel. 31, Created)
DT 18-APR-2005 (Rel. 83, Last updated, Version 11)
XX
DE H.sapiens fau mRNA
XX
KW fau gene.
XX
OS Homo sapiens (human)
OC Eukaryota; Metazoa; Chordata; Craniata; Vertebrata; Euteleostomi; Mammalia;
OC Eutheria; Euarchontoglires; Primates; Haplorrhini; Catarrhini; Hominidae;
OC Homo.
XX
RN [1]
RP 1-518
RA Michiels L.M.R.;
RT ;
RL Submitted (29-APR-1992) to the INSDC.
RL L.M.R. Michiels, University of Antwerp, Dept of Biochemistry,
RL Universiteisplein 1, 2610 Wilrijk, BELGIUM
XX
RN [2]
RP 1-518
RX PUBMED; 8395683.
RA Michiels L., Van der Rauwelaert E., Van Hasselt F., Kas K., Merregaert J.;
RT "fau cDNA encodes a ubiquitin-like-S30 fusion protein and is expressed as
RT an antisense sequence in the Finkel-Biskis-Reilly murine sarcoma virus";
RL Oncogene 8(9):2537-2546(1993).
XX
DR Ensembl-Gn; ENSG00000149806; Homo_sapiens.
DR Ensembl-Tr; ENST00000279259; Homo_sapiens.
DR Ensembl-Tr; ENST00000434372; Homo_sapiens.
DR Ensembl-Tr; ENST00000525297; Homo_sapiens.
DR Ensembl-Tr; ENST00000526555; Homo_sapiens.
DR Ensembl-Tr; ENST00000527548; Homo_sapiens.
DR Ensembl-Tr; ENST00000529259; Homo_sapiens.
DR Ensembl-Tr; ENST00000529639; Homo_sapiens.
DR Ensembl-Tr; ENST00000531743; Homo_sapiens.
XX
FH Key Location/Qualifiers
FH
FT source 1..518
FT /organism="Homo sapiens"
FT /chromosome="11q"
FT /map="13"
FT /mol_type="mRNA"
FT /clone_lib="cDNA"
FT /clone="pUIA 631"
FT /tissue_type="placenta"
FT /db_xref="taxon:9606"
FT misc_feature 57..278
FT /note="ubiquitin like part"
FT CDS 57..458
FT /gene="fau"
FT /db_xref="GDB:135476"
FT /db_xref="GOA:P35544"
FT /db_xref="GOA:P62861"
FT /db_xref="H-InvDB:HIT000322806.14"
FT /db_xref="HGNC:3597"
FT /db_xref="InterPro:IPR000626"
FT /db_xref="InterPro:IPR006846"
FT /db_xref="InterPro:IPR019954"
FT /db_xref="InterPro:IPR019955"
FT /db_xref="InterPro:IPR019956"
FT /db_xref="PDB:2L7R"
FT /db_xref="UniProtKB/Swiss-Prot:P35544"
FT /db_xref="UniProtKB/Swiss-Prot:P62861"
FT /protein_id="CAA46716.1"
FT /translation="MQLFVRAQELHTFEVTGQETVAQIKAHVASLEGIAPEDQVVLLAG
FT APLEDEATLGQCGVEALTTLEVAGRMLGGKVHGSLARAGKVRGQTPKVAKQEKKKKKTG
FT RAKRRMQYNRRFVNVVPTFGKKKGPNANS"
FT misc_feature 98..102
FT /note="nucleolar localization signal"
FT misc_feature 279..458
FT /note="S30 part"
FT polyA_signal 484..489
FT polyA_site 509
XX
SQ Sequence 518 BP; 125 A; 139 C; 148 G; 106 T; 0 other;
ttcctctttc tcgactccat cttcgcggta gctgggaccg ccgttcagtc gccaatatgc 60
agctctttgt ccgcgcccag gagctacaca ccttcgaggt gaccggccag gaaacggtcg 120
cccagatcaa ggctcatgta gcctcactgg agggcattgc cccggaagat caagtcgtgc 180
tcctggcagg cgcgcccctg gaggatgagg ccactctggg ccagtgcggg gtggaggccc 240
tgactaccct ggaagtagca ggccgcatgc ttggaggtaa agttcatggt tccctggccc 300
gtgctggaaa agtgagaggt cagactccta aggtggccaa acaggagaag aagaagaaga 360
agacaggtcg ggctaagcgg cggatgcagt acaaccggcg ctttgtcaac gttgtgccca 420
cctttggcaa gaagaagggc cccaatgcca actcttaagt cttttgtaat tctggctttc 480
tctaataaaa aagccactta gttcagtcaa aaaaaaaa 518
//
|
Input files for usage example 2
Database entry: tembl:x65921
ID X65921; SV 1; linear; genomic DNA; STD; HUM; 2016 BP.
XX
AC X65921; S45242;
XX
DT 13-MAY-1992 (Rel. 31, Created)
DT 14-NOV-2006 (Rel. 89, Last updated, Version 7)
XX
DE H.sapiens fau 1 gene
XX
KW fau 1 gene.
XX
OS Homo sapiens (human)
OC Eukaryota; Metazoa; Chordata; Craniata; Vertebrata; Euteleostomi; Mammalia;
OC Eutheria; Euarchontoglires; Primates; Haplorrhini; Catarrhini; Hominidae;
OC Homo.
XX
RN [1]
RP 1-2016
RA Kas K.;
RT ;
RL Submitted (29-APR-1992) to the INSDC.
RL K. Kas, University of Antwerp, Dept of Biochemistry T3.22,
RL Universiteitsplein 1, 2610 Wilrijk, BELGIUM
XX
RN [2]
RP 1-2016
RX DOI; 10.1016/0006-291X(92)91286-Y.
RX PUBMED; 1326960.
RA Kas K., Michiels L., Merregaert J.;
RT "Genomic structure and expression of the human fau gene: encoding the
RT ribosomal protein S30 fused to a ubiquitin-like protein";
RL Biochem. Biophys. Res. Commun. 187(2):927-933(1992).
XX
DR Ensembl-Gn; ENSG00000149806; Homo_sapiens.
DR Ensembl-Tr; ENST00000279259; Homo_sapiens.
DR Ensembl-Tr; ENST00000434372; Homo_sapiens.
DR Ensembl-Tr; ENST00000525297; Homo_sapiens.
DR Ensembl-Tr; ENST00000526555; Homo_sapiens.
DR Ensembl-Tr; ENST00000527548; Homo_sapiens.
DR Ensembl-Tr; ENST00000529259; Homo_sapiens.
DR Ensembl-Tr; ENST00000529639; Homo_sapiens.
DR Ensembl-Tr; ENST00000531743; Homo_sapiens.
DR GDB; 191789.
DR GDB; 191790.
DR GDB; 354872.
DR GDB; 4590236.
XX
FH Key Location/Qualifiers
FH
FT source 1..2016
[Part of this file has been deleted for brevity]
FT RAKRRMQYNRRFVNVVPTFGKKKGPNANS"
FT intron 857..950
FT /number=2
FT exon 951..1095
FT /number=3
FT intron 1096..1556
FT /number=3
FT exon 1557..1612
FT /number=4
FT intron 1613..1786
FT /number=4
FT exon 1787..>1912
FT /number=5
FT polyA_signal 1938..1943
XX
SQ Sequence 2016 BP; 421 A; 562 C; 538 G; 495 T; 0 other;
ctaccatttt ccctctcgat tctatatgta cactcgggac aagttctcct gatcgaaaac 60
ggcaaaacta aggccccaag taggaatgcc ttagttttcg gggttaacaa tgattaacac 120
tgagcctcac acccacgcga tgccctcagc tcctcgctca gcgctctcac caacagccgt 180
agcccgcagc cccgctggac accggttctc catccccgca gcgtagcccg gaacatggta 240
gctgccatct ttacctgcta cgccagcctt ctgtgcgcgc aactgtctgg tcccgccccg 300
tcctgcgcga gctgctgccc aggcaggttc gccggtgcga gcgtaaaggg gcggagctag 360
gactgccttg ggcggtacaa atagcaggga accgcgcggt cgctcagcag tgacgtgaca 420
cgcagcccac ggtctgtact gacgcgccct cgcttcttcc tctttctcga ctccatcttc 480
gcggtagctg ggaccgccgt tcaggtaaga atggggcctt ggctggatcc gaagggcttg 540
tagcaggttg gctgcggggt cagaaggcgc ggggggaacc gaagaacggg gcctgctccg 600
tggccctgct ccagtcccta tccgaactcc ttgggaggca ctggccttcc gcacgtgagc 660
cgccgcgacc accatcccgt cgcgatcgtt tctggaccgc tttccactcc caaatctcct 720
ttatcccaga gcatttcttg gcttctctta caagccgtct tttctttact cagtcgccaa 780
tatgcagctc tttgtccgcg cccaggagct acacaccttc gaggtgaccg gccaggaaac 840
ggtcgcccag atcaaggtaa ggctgcttgg tgcgccctgg gttccatttt cttgtgctct 900
tcactctcgc ggcccgaggg aacgcttacg agccttatct ttccctgtag gctcatgtag 960
cctcactgga gggcattgcc ccggaagatc aagtcgtgct cctggcaggc gcgcccctgg 1020
aggatgaggc cactctgggc cagtgcgggg tggaggccct gactaccctg gaagtagcag 1080
gccgcatgct tggaggtgag tgagagagga atgttctttg aagtaccggt aagcgtctag 1140
tgagtgtggg gtgcatagtc ctgacagctg agtgtcacac ctatggtaat agagtacttc 1200
tcactgtctt cagttcagag tgattcttcc tgtttacatc cctcatgttg aacacagacg 1260
tccatgggag actgagccag agtgtagttg tatttcagtc acatcacgag atcctagtct 1320
ggttatcagc ttccacacta aaaattaggt cagaccaggc cccaaagtgc tctataaatt 1380
agaagctgga agatcctgaa atgaaactta agatttcaag gtcaaatatc tgcaactttg 1440
ttctcattac ctattgggcg cagcttctct ttaaaggctt gaattgagaa aagaggggtt 1500
ctgctgggtg gcaccttctt gctcttacct gctggtgcct tcctttccca ctacaggtaa 1560
agtccatggt tccctggccc gtgctggaaa agtgagaggt cagactccta aggtgagtga 1620
gagtattagt ggtcatggtg ttaggacttt ttttcctttc acagctaaac caagtccctg 1680
ggctcttact cggtttgcct tctccctccc tggagatgag cctgagggaa gggatgctag 1740
gtgtggaaga caggaaccag ggcctgatta accttccctt ctccaggtgg ccaaacagga 1800
gaagaagaag aagaagacag gtcgggctaa gcggcggatg cagtacaacc ggcgctttgt 1860
caacgttgtg cccacctttg gcaagaagaa gggccccaat gccaactctt aagtcttttg 1920
taattctggc tttctctaat aaaaaagcca cttagttcag tcatcgcatt gtttcatctt 1980
tacttgcaag gcctcaggga gaggtgtgct tctcgg 2016
//
|
You can specify a file of ranges to extract by giving the '-regions' qualifier the value '@' followed by the name of the file containing the ranges. (eg: '-regions @myfile').
The format of the range file is:
- Comment lines start with '#' in the first column.
- Comment lines and blank lines are ignored.
- The line may start with white-space.
- There are two positive (integer) numbers per line separated by one or more space or TAB characters.
- The second number must be greater or equal to the first number.
- There can be optional text after the two numbers to annotate the line.
- White-space before or after the text is removed.
An example range file is:
# this is my set of ranges 12 23 4 5 this is like 12-23, but smaller 67 10348 interesting region
Output file format
The output is a standard EMBOSS sequence file.
The results can be output in one of several styles by using the command-line qualifier -osformat xxx, where 'xxx' is replaced by the name of the required format. The available format names are: embl, genbank, gff, pir, swiss, dasgff, debug, listfile, dbmotif, diffseq, excel, feattable, motif, nametable, regions, seqtable, simple, srs, table, tagseq.
See: http://emboss.sf.net/docs/themes/SequenceFormats.html for further information on sequence formats.
Output files for usage example
File: result.seq
>X65923 X65923.1 H.sapiens fau mRNA ctcgactccat |
Output files for usage example 2
File: result2.seq
>X65921 X65921.1 H.sapiens fau 1 gene tccctctcgatacactcgggacaagttagggc |
If the option -separate is used then each specified region is written to the output file as a separate sequence. The name of the sequence is created from the name of the original sequence with the start and end positions of the range appended with underscore characters between them,
For example: "XYZ region 2 to 34" is written as: "XYZ_2_34"
Data files
None.Notes
extractseq allows you to specify one or more regions of a sequence to extract sub-sequences from to build up a contiguous output sequence. This is modelled on the cell's process of splicing out exons from mRNA, but the program is generally applicable to any cutting and splicing or editing operation on a single sequence.
Where the -regions option is used to specify output as separate sequences, the name of the sequence is created from the name of the original sequence with the start and end positions of the range appended with underscore characters between them, eg: XYZ region 2 to 34 is written as: XYZ_2_34. In such cases the output sequence format must be capable of supporting multiple sequences.
References
None.Warnings
None.Diagnostic Error Messages
Several warning messages about malformed region specifications:- Non-digit found in region ...
- Unpaired start of a region found in ...
- Non-digit found in region ...
- The start of a pair of region positions must be smaller than the end in ...
Exit status
It exits with status 0, unless a region is badly constructed.Known bugs
None noted.Comments
See also
| Program name | Description |
|---|---|
| aligncopy | Read and write alignments |
| aligncopypair | Read and write pairs from alignments |
| biosed | Replace or delete sequence sections |
| codcopy | Copy and reformat a codon usage table |
| cutseq | Remove a section from a sequence |
| degapseq | Remove non-alphabetic (e.g. gap) characters from sequences |
| descseq | Alter the name or description of a sequence |
| entret | Retrieve sequence entries from flatfile databases and files |
| extractalign | Extract regions from a sequence alignment |
| extractfeat | Extract features from sequence(s) |
| featcopy | Read and write a feature table |
| featmerge | Merge two overlapping feature tables |
| featreport | Read and write a feature table |
| feattext | Return a feature table original text |
| listor | Write a list file of the logical OR of two sets of sequences |
| makenucseq | Create random nucleotide sequences |
| makeprotseq | Create random protein sequences |
| maskambignuc | Mask all ambiguity characters in nucleotide sequences with N |
| maskambigprot | Mask all ambiguity characters in protein sequences with X |
| maskfeat | Write a sequence with masked features |
| maskseq | Write a sequence with masked regions |
| newseq | Create a sequence file from a typed-in sequence |
| nohtml | Remove mark-up (e.g. HTML tags) from an ASCII text file |
| noreturn | Remove carriage return from ASCII files |
| nospace | Remove whitespace from an ASCII text file |
| notab | Replace tabs with spaces in an ASCII text file |
| notseq | Write to file a subset of an input stream of sequences |
| nthseq | Write to file a single sequence from an input stream of sequences |
| nthseqset | Read and write (return) one set of sequences from many |
| pasteseq | Insert one sequence into another |
| revseq | Reverse and complement a nucleotide sequence |
| seqcount | Read and count sequences |
| seqret | Read and write (return) sequences |
| seqretsetall | Read and write (return) many sets of sequences |
| seqretsplit | Read sequences and write them to individual files |
| sizeseq | Sort sequences by size |
| skipredundant | Remove redundant sequences from an input set |
| skipseq | Read and write (return) sequences, skipping first few |
| splitsource | Split sequence(s) into original source sequences |
| splitter | Split sequence(s) into smaller sequences |
| trimest | Remove poly-A tails from nucleotide sequences |
| trimseq | Remove unwanted characters from start and end of sequence(s) |
| trimspace | Remove extra whitespace from an ASCII text file |
| union | Concatenate multiple sequences into a single sequence |
| vectorstrip | Remove vectors from the ends of nucleotide sequence(s) |
| yank | Add a sequence reference (a full USA) to a list file |
Author(s)
Gary Williams formerly at:MRC Rosalind Franklin Centre for Genomics Research Wellcome Trust Genome Campus, Hinxton, Cambridge, CB10 1SB, UK
Please report all bugs to the EMBOSS bug team (emboss-bug © emboss.open-bio.org) not to the original author.